Comments on: Determining a Stale Hard Drive in Most RAIDs http://www.dtidata.com/resourcecenter/2008/08/01/determining-a-stale-drive-in-most-raids/ Hard drive recovery data recovery resource center with how to guides for windows RAID Snap server file system repair NTFS partition recovery tools tips and tricks to recover data Fri, 10 Feb 2012 20:43:29 -0500 hourly 1 http://wordpress.org/?v=3.1.2 By: Joshua Dibble http://www.dtidata.com/resourcecenter/2008/08/01/determining-a-stale-drive-in-most-raids/comment-page-1/#comment-6624 Joshua Dibble Mon, 19 Jan 2009 19:54:45 +0000 http://www.dtidata.com/resourcecenter/?p=253#comment-6624 Well thank you so much for the info. I really am just a newbe to this stuff. I kinda understand the what i have to do but i am sure it is harder than it looks. Do you think that if I just leave my cpu on and just go into standby that it will prolonge the inevitable? See this cpu in all cost me 300 dollars and I might be able to save the files to CD and SD cards and then transfer them onto a newer cpu. What stuff will I lose if the bad sector fails? Will this sector crash? How can I get an idea on how fast it will crash? If I don't add or remove programs as frequentely will it slow the problems down? If I leave the cpu on and leave it in stand by when not using it will it be ok? What strains a sector the most? Is there anything I can avoid doing that will ease the sector? How can I find the bad sector? What, if any, programs will I have to buy/run to find the bad sector on the E;/? Well I understand that I would normally have to pay for the answers in one way or another so first thing first, where are you guys located? If I wanted to have you fix these problems, how much are we talking (roughly)? What would I have to send you as far as the cpu goes? Well again thank you so much for the reply. Josh.... Well thank you so much for the info. I really am just a newbe to this stuff. I kinda understand the what i have to do but i am sure it is harder than it looks. Do you think that if I just leave my cpu on and just go into standby that it will prolonge the inevitable? See this cpu in all cost me 300 dollars and I might be able to save the files to CD and SD cards and then transfer them onto a newer cpu.
What stuff will I lose if the bad sector fails?
Will this sector crash?
How can I get an idea on how fast it will crash?
If I don’t add or remove programs as frequentely will it slow the problems down?
If I leave the cpu on and leave it in stand by when not using it will it be ok?
What strains a sector the most?
Is there anything I can avoid doing that will ease the sector?
How can I find the bad sector?
What, if any, programs will I have to buy/run to find the bad sector on the E;/?

Well I understand that I would normally have to pay for the answers in one way or another so first thing first, where are you guys located? If I wanted to have you fix these problems, how much are we talking (roughly)? What would I have to send you as far as the cpu goes?

Well again thank you so much for the reply.
Josh….

]]> By: Dick Correa http://www.dtidata.com/resourcecenter/2008/08/01/determining-a-stale-drive-in-most-raids/comment-page-1/#comment-6611 Dick Correa Fri, 16 Jan 2009 22:14:41 +0000 http://www.dtidata.com/resourcecenter/?p=253#comment-6611 Joshua, The reason you are having problems is because you have bad sectors on the drive and they are getting worse. This accounts for the long defrag as well as the scan hanging in the same place. It is not good for the drive and ultimately your data to continue in this vein of recovery as it will exacerbate the problem to the point where you will destroy all data on your drive. If you wish to try this yourself you must isolate the bad drive, image it onto another drive using a smart cloner so as not to belabor multiple retries on a single sector and then recover your data from the newly imaged drive using a data recovery software product. The cloner can run from $99.00 to several hundred dollars and the data recovery software is usually around $50.00. If you use a cheaper cloner and not a smart cloner you will have to hand jump the bad areas of the drive. This is a long and involved process and could take many hours. You must sit with the drive and watch this process, as you do not want the drive to overheat or hang in a particular place. I hope this helps. We do this kind of work at the shop all the time. We have special tools specifically designed for your problem and can retrieve data that most normal cloners cannot. The price is extremely reasonable. Dick Correa Joshua,

The reason you are having problems is because you have bad sectors on the drive and they are getting worse. This accounts for the long defrag as well as the scan hanging in the same place.
It is not good for the drive and ultimately your data to continue in this vein of recovery as it will exacerbate the problem to the point where you will destroy all data on your drive.
If you wish to try this yourself you must isolate the bad drive, image it onto another drive using a smart cloner so as not to belabor multiple retries on a single sector and then recover your data from the newly imaged drive using a data recovery software product. The cloner can run from $99.00 to several hundred dollars and the data recovery software is usually around $50.00. If you use a cheaper cloner and not a smart cloner you will have to hand jump the bad areas of the drive.

This is a long and involved process and could take many hours. You must sit with the drive and watch this process, as you do not want the drive to overheat or hang in a particular place.

I hope this helps. We do this kind of work at the shop all the time. We have special tools specifically designed for your problem and can retrieve data that most normal cloners cannot. The price is extremely reasonable.

Dick Correa

]]> By: Joshua Dibble http://www.dtidata.com/resourcecenter/2008/08/01/determining-a-stale-drive-in-most-raids/comment-page-1/#comment-6609 Joshua Dibble Fri, 16 Jan 2009 21:16:26 +0000 http://www.dtidata.com/resourcecenter/?p=253#comment-6609 I don't really know. My hard drive C:\ is a stand alone 80gig and the drive e:\ is internal. It is not an NTFS file system it is a fat32. I really don't know the difference between the two. Basically when the cpu starts up it goes to scan disk automatically Checks drive e:\ for consistency. Then it gets stuck at 16% and will repeat the process for infinety. repeatingly turning cpu on and going through the scan untill it gets to 16% and then shuts down. I can click a key within 10 secs or so and skip the process but I would like to figure out this error. I thought that maybe the disk partition was lost or damaged but it shows that a partion is still there: E:\ = recovery. This problem started when I installed Verizon internet security. I had performed a 3 hour long defrag using the verizon security suite. This was way longer then usual. I then tried to restore to a point which i did but since this scan disk stuff started it slowed me right down to about three times slower. Sell i will try to find info to copy to this page and let you see. I don't know if I answered your question or not. If you have more questions please ask me. Microsoft Windows XP Home Edition Version 2002 Service Pack 3 E-machine W3506 Intel(R) Cleron(R) D CPU 3.20GHz 3.20Ghz, 448 Mb of Ram I don’t really know. My hard drive C:\ is a stand alone 80gig and the drive e:\ is internal. It is not an NTFS file system it is a fat32. I really don’t know the difference between the two. Basically when the cpu starts up it goes to scan disk automatically Checks drive e:\ for consistency. Then it gets stuck at 16% and will repeat the process for infinety. repeatingly turning cpu on and going through the scan untill it gets to 16% and then shuts down. I can click a key within 10 secs or so and skip the process but I would like to figure out this error. I thought that maybe the disk partition was lost or damaged but it shows that a partion is still there: E:\ = recovery. This problem started when I installed Verizon internet security. I had performed a 3 hour long defrag using the verizon security suite. This was way longer then usual. I then tried to restore to a point which i did but since this scan disk stuff started it slowed me right down to about three times slower. Sell i will try to find info to copy to this page and let you see. I don’t know if I answered your question or not. If you have more questions please ask me.

Microsoft Windows XP
Home Edition
Version 2002
Service Pack 3
E-machine
W3506
Intel(R)
Cleron(R) D CPU 3.20GHz
3.20Ghz, 448 Mb of Ram

]]> By: Michael Stankard http://www.dtidata.com/resourcecenter/2008/08/01/determining-a-stale-drive-in-most-raids/comment-page-1/#comment-6607 Michael Stankard Fri, 16 Jan 2009 20:52:12 +0000 http://www.dtidata.com/resourcecenter/?p=253#comment-6607 Josh, Is your E: drive part of a RAID? Is it a stand alone drive or a partition? We can help you, but need more info Josh,

Is your E: drive part of a RAID? Is it a stand alone drive or a partition? We can help you, but need more info

]]> By: Joshua Dibble http://www.dtidata.com/resourcecenter/2008/08/01/determining-a-stale-drive-in-most-raids/comment-page-1/#comment-6602 Joshua Dibble Thu, 15 Jan 2009 20:29:52 +0000 http://www.dtidata.com/resourcecenter/?p=253#comment-6602 I was wondering about the consistency of the hard drive. My e:/ is showing inconsistency when starting up windows xp. It continuely wants to run a disk check so I really don't where to start. Any one have any solutions? I don't know where to find info on the net that is safe for me to diagnose the problem. Thank you for the feed back. Josh... I was wondering about the consistency of the hard drive. My e:/ is showing inconsistency when starting up windows xp. It continuely wants to run a disk check so I really don’t where to start. Any one have any solutions? I don’t know where to find info on the net that is safe for me to diagnose the problem. Thank you for the feed back. Josh…

]]>